Occlusion Training Bands Manufacturers

The maintenance and maintenance of fitness equipment in large and medium-sized gymnasiums are divided into daily maintenance, regular maintenance and regional maintenance. The three are interdependent and cross-cutting. Routine maintenance is carried out on a daily basis, and regular maintenance is carried out on the basis of daily maintenance.
1. Daily maintenance
Routine maintenance is a regular and institutionalized maintenance of fitness equipment, which is the basis of all maintenance work. The general procedures for daily maintenance of large-scale fitness equipment commonly used in large and medium-sized gyms are as follows:,
(1) Maintenance before class (class)
① Check that the fixing device, transmission device, power supply and electrical control device are safe and reliable; all operating mechanisms are normal and good.
②The safety protection device is complete and effective.
③Wipe the fitness equipment, and check the lubrication if there are running sliding parts.
④Check the shift record of the previous shift carefully, and then fill in the shift record.
(2) Maintenance during teaching and training.
① Operate strictly in accordance with the operating procedures.
②Concentrate on work, pay attention to observe the operation of fitness equipment and various conditions of instruments. Observe whether there are any abnormalities through the sound and smell.
③ Prevent the operation and operation of fitness equipment with illnesses. If there is any malfunction, stop the machine for inspection and remove it in time, and make a record of troubleshooting.
(3) Maintenance after class (class)
①Keep the fitness equipment clean, the work place is tidy, and the scene is free of dirt and garbage.
②Ensure that all the instruments, fixtures, transmission devices, oil system, cooling system and safety protection system on the fitness equipment are intact, sensitive and reliable, and the instructions are accurate.
③After completing the maintenance of the fitness equipment that is not in continuous operation, the fitness equipment should return to the non-working state and cut off the power supply.
④ Fill in the operation records and shift records carefully.
2. Regular maintenance
Regular maintenance is based on daily maintenance, which stipulates that fitness equipment should be maintained at a deeper level after a period of time (the length of time depends on different fitness equipment) to eliminate hidden dangers of accidents, reduce wear and tear of fitness equipment, and ensure long-term normal operation of fitness equipment. The main contents of regular maintenance are:
(1) Thoroughly clean the contents of the exterior of the fitness equipment, and dredge the pipes and oil passages.
(2) Dismantle and check the required maintenance parts of fitness equipment.
(3) Remove dust and oil from the motors, connectors, relays, etc. of fitness equipment, and ensure that their wiring is intact and undamaged.
(4) Lubricate the mechanical transmission equipment, strengthen the parts and adjust the mechanical gap, and replace the parts if necessary.
(5) The adjustments, minor repairs, and replacement parts shall be recorded one by one, and the difficult and unresolved problems shall be recorded and reported to the technical supervisor, and timely measures shall be taken to solve them.
(6) Supervisors check and accept the results of regular maintenance.